Table of contents

9.4 Initial Configurations

    Table of contents
    You are currently comparing two old versions - only when you are comparing against the latest version can you revert. Return to version archive.

    Combined revision comparison

    Comparing version 19:09, 3 Mar 2013 by genya with version 17:37, 4 Mar 2013 by yagi.

    After VPN Bridge is installed, there are several settings that first must be configured. This section describes how to configure these settings with examples of the settings when using SoftEther VPN Server Manager. The same settings can also be configured using vpncmd, so as a basic rule, the corresponding vpncmd command names are also provided. For information about detailed vpncmd operations, please refer to #6#.6. Command Line Management Utility Manual.

    ...

    For information about configuring these settings, please refer to #3#,3. SoftEther VPN Server Manual#5#, , 5. SoftEther VPN Bridge Manual,and and#6#.6. Command Line Management Utility Manual. For detailed information about connecting bases using VPN Bridge, please refer to # 10.5Build a LAN-to-LAN VPN (Using L2 Bridge)# and #10.6Build a LAN-to-LAN VPN (Using L3 IP Routing)#..

    For examples of using the user mode of VPN Bridge with the SecureNAT function, please refer to #10.11Exploit SecureNAT for Remote Access into Firewall without Any Permission#..

    Version from 19:09, 3 Mar 2013

    This revision modified by genya (Ban)

    After VPN Bridge is installed, there are several settings that first must be configured. This section describes how to configure these settings with examples of the settings when using SoftEther VPN Server Manager. The same settings can also be configured using vpncmd, so as a basic rule, the corresponding vpncmd command names are also provided. For information about detailed vpncmd operations, please refer to #6#.

    ...

    For information about configuring these settings, please refer to #3#, #5#, and #6#. For detailed information about connecting bases using VPN Bridge, please refer to #10.5# and #10.6#.

    For examples of using the user mode of VPN Bridge with the SecureNAT function, please refer to #10.11#.

    Version as of 17:37, 4 Mar 2013

    This revision modified by yagi (Ban)

    After VPN Bridge is installed, there are several settings that first must be configured. This section describes how to configure these settings with examples of the settings when using SoftEther VPN Server Manager. The same settings can also be configured using vpncmd, so as a basic rule, the corresponding vpncmd command names are also provided. For information about detailed vpncmd operations, please refer to 6. Command Line Management Utility Manual.

    ...

    For information about configuring these settings, please refer to 3. SoftEther VPN Server Manual, 5. SoftEther VPN Bridge Manual,and 6. Command Line Management Utility Manual. For detailed information about connecting bases using VPN Bridge, please refer to 10.5Build a LAN-to-LAN VPN (Using L2 Bridge) and 10.6Build a LAN-to-LAN VPN (Using L3 IP Routing).

    For examples of using the user mode of VPN Bridge with the SecureNAT function, please refer to 10.11Exploit SecureNAT for Remote Access into Firewall without Any Permission.