Table of contents
Combined revision comparison
...
For more information about the system requirements, please refer to #12.1.1#.Specifications.
...
As described in #3.1 Operating System Requirements# and #3.2 Operating Modes#, , SoftEther VPN Bridge can be operated in either service mode or user mode. When configuring VPN Bridge for use as part of an everyday operation system in a company, we recommend installing SoftEther VPN Bridge in service mode. To install the VPN Bridge program to the system in service mode on a Linux operating system, you must register the vpnbridge program as a daemon program in the Linux startup script.
...
The following software and libraries are required to install VPN Bridge to a Linux operating system. Check that the following software and libraries are installed to the system and are enabled. (If the recommended environment distribution is installed using the method specified in #7.3.1#,7.3 Install on Linux and Initial Configurations, these libraries are also installed.)
...
If an error occurs during this process, creation of the vpnbridge program fails. In this case, see #7.3.1#7.3 Install on Linux and Initial Configurationsand#7.3.3# again and check whether any required libraries are missing.
...
You can use the check command on the vpncmd command line management utility to automatically check whether the system has sufficient functions to operate VPN Bridge. For details, please refer to #6.6VPN Tools Command Reference#..
...
If, however, the system fails at any of the above check items, we recommend checking #7.3.1#7.3 Install on Linux and Initial Configurationsand#7.3.3# again.
...
It is unlikely that VPN Bridge would malfunction due to a problem with the physical memory of the computer or a software bug. If this should occur and the VPN Bridge service does not respond when you try to stop the service using the method above, you can stop the service by forcibly terminating the vpnbridge process. For the detailed method for forcibly terminating the vpnbridge process, please refer to the method of using the kill command described in #3.2.2#.
3.2 Operating Modes.
...
- The local bridge function cannot be used. (For details, please refer to
#3.6Local Bridges#.).) - After starting the system, the user must log on and manually start the vpnbridge process, decreasing operability.
Version from 18:37, 2 Mar 2013
...
For more information about the system requirements, please refer to #12.1.1#.
...
As described in #3.1# and #3.2#, SoftEther VPN Bridge can be operated in either service mode or user mode. When configuring VPN Bridge for use as part of an everyday operation system in a company, we recommend installing SoftEther VPN Bridge in service mode. To install the VPN Bridge program to the system in service mode on a Linux operating system, you must register the vpnbridge program as a daemon program in the Linux startup script.
...
The following software and libraries are required to install VPN Bridge to a Linux operating system. Check that the following software and libraries are installed to the system and are enabled. (If the recommended environment distribution is installed using the method specified in #7.3.1#, these libraries are also installed.)
...
If an error occurs during this process, creation of the vpnbridge program fails. In this case, see #7.3.1# and #7.3.3# again and check whether any required libraries are missing.
...
You can use the check command on the vpncmd command line management utility to automatically check whether the system has sufficient functions to operate VPN Bridge. For details, please refer to #6.6#.
...
If, however, the system fails at any of the above check items, we recommend checking #7.3.1# and #7.3.3# again.
...
It is unlikely that VPN Bridge would malfunction due to a problem with the physical memory of the computer or a software bug. If this should occur and the VPN Bridge service does not respond when you try to stop the service using the method above, you can stop the service by forcibly terminating the vpnbridge process. For the detailed method for forcibly terminating the vpnbridge process, please refer to the method of using the kill command described in #3.2.2#.
...
- The local bridge function cannot be used. (For details, please refer to
#3.6#.) - After starting the system, the user must log on and manually start the vpnbridge process, decreasing operability.
Version as of 17:35, 4 Mar 2013
...
For more information about the system requirements, please refer to Specifications.
...
As described in 3.1 Operating System Requirements and 3.2 Operating Modes, SoftEther VPN Bridge can be operated in either service mode or user mode. When configuring VPN Bridge for use as part of an everyday operation system in a company, we recommend installing SoftEther VPN Bridge in service mode. To install the VPN Bridge program to the system in service mode on a Linux operating system, you must register the vpnbridge program as a daemon program in the Linux startup script.
...
The following software and libraries are required to install VPN Bridge to a Linux operating system. Check that the following software and libraries are installed to the system and are enabled. (If the recommended environment distribution is installed using the method specified in 7.3 Install on Linux and Initial Configurations, these libraries are also installed.)
...
If an error occurs during this process, creation of the vpnbridge program fails. In this case, see 7.3 Install on Linux and Initial Configurations again and check whether any required libraries are missing.
...
You can use the check command on the vpncmd command line management utility to automatically check whether the system has sufficient functions to operate VPN Bridge. For details, please refer to 6.6VPN Tools Command Reference.
...
If, however, the system fails at any of the above check items, we recommend checking 7.3 Install on Linux and Initial Configurations again.
...
It is unlikely that VPN Bridge would malfunction due to a problem with the physical memory of the computer or a software bug. If this should occur and the VPN Bridge service does not respond when you try to stop the service using the method above, you can stop the service by forcibly terminating the vpnbridge process. For the detailed method for forcibly terminating the vpnbridge process, please refer to the method of using the kill command described in 3.2 Operating Modes.
...
- The local bridge function cannot be used. (For details, please refer to 3.6Local Bridges.)
- After starting the system, the user must log on and manually start the vpnbridge process, decreasing operability.
