Table of contents
You are currently comparing two old versions - only when you are comparing against the latest version can you revert. Return to version archive.Hardware Requirements for SoftEther VPN Client
Hardware Requirements for SoftEther VPN
Combined revision comparison
...
- Supported Payload Protocols: Any Protocols in Ethernet
- Upper Underlying Protocol:
SSL (Secure Socket Layer) 3.0 /TLS (Transport Layer Security) 1.0, 1.1, 1.2, 1.31.0 - Lower Underlying Protocol: TCP/IP and UDP/IP Hybrid (on IPv4 and IPv6)
- Ciphers:
TLS 1.3-based strong ciphersRC4-MD5, RC4-SHA, AES128-SHA, AES256-SHA, DES-CBC-SHA and DES-CBC3-SHA - Data Compression: zlib
- Session-key: 128bit
- Based Standards: Extended HTTPS over SSL Protocol (RFC2818, RFC 5246)
- WAN Optimization: 1-32 Parallel TCP Connection to Construct a Logical VPN Session
- Persistent Link: Infinite Auto-reconnect Function
- Proxy Support: HTTP Proxy Server and SOCKS Proxy Server
- TCP Ports: 443, 992 and 5555 is Listening by Default.
You can add/delete listening TCP ports. - Behind NAT Solution:
NAT-Traversal Function is enabled by default. No need to open any TCP/UDP ports on the NAT for accepting VPN connections which are initiated from Internet-side. - Anti-restricted Firewall Solution:
VPN over ICMP (Encapsulate all Ethernet packets over ICMP packets)
VPN over DNS (Encapsulate all Ethernet packets over DNS packets) - User-authentication:
- Anonymous
- Standard Password Authentication
- Password Authentication for RADIUS
- Password Authentication for NT Domain and Active Directory
- X.509 RSA PKI Certification Authentication (Key file on Disk)
- X.509 RSA PKI Certification Authentication (PKCS#11 Smart-cards or USB Tokens) - VPN Encapsulation Payload:
Ethernet (IEEE802.3) Frames (Up to 1,514bytes or 1,518bytes for IEEE802.1Q VLAN Tags) - Supported VPN Clients: SoftEther VPN Client
- Supported Client OS: Windows and Linux
- Supported VPN Topologies: Remote-access VPN, Site-to-Site VPN (L2-Bridging) and Site-to-Site VPN (L3-Routing)
...
- User-authentication Methods: PAP and MS-CHAPv2
- NAT-Traversal: RFC3947 IPsec over UDP Encapsulation
- Transport UDP Ports:
UDP 500 and 4500
(Allow both ports on the firewall. Add UDP port forwarding for both 500 & 4500 on the NAT.) - Supported Hashes
Ciphers:DES-CBC, 3DES-CBC, AES-CBC, Blowfish-CBC and CAST-128-CBC Supported Hashes:MD5 and SHA-1- Supported Diffie-Hellman Groups:
MODP 768 (Group 1), MODP 1024 (Group 2) and MODP 1536 (Group 5) - Compatible VPN Clients: Built-in VPN Clients on Windows, Mac, iOS and Android
- Compatible Client OS: Windows, Mac, iOS, Android and other L2TP-supported VPN Client OS
- Supported VPN Topologies: Remote-access VPN
...
- Clone Function for SSTP-VPN Server of Microsoft's Windows Server 2008 R2 / 2012.
- User-authentication Methods: PAP and MS-CHAPv2
- Supported Ciphers and Hashes on TLS:
TLS-1.3 based strong ciphersRC4-MD5, RC4-SHA, AES128-SHA, AES256-SHA, DES-CBC-SHA and DES-CBC3-SHA - Compatible VPN Clients: Built-in VPN Clients on Windows Vista, 7, 8, 10, 11, RT
- Compatible Client OS: Windows Vista, 7, 8, 10, 11, RT, Server 2008, Server 2008 R2, Server 2012
- Supported VPN Topologies: Remote-access VPN
...
- Clone Function for Cisco's L2TPv3 Site-to-Site VPN Server
- NAT-Traversal: RFC3947 IPsec over UDP Encapsulation
- Transport UDP Ports:
UDP 500 and 4500
(Allow both ports on the firewall. Add UDP port forwarding for both 500 & 4500 on the NAT.) - Supported Ciphers:
DES-CBC, 3DES-CBC, AES-CBC, Blowfish-CBC and CAST-128-CBC - Supported Hashes:
MD5 and SHA-1 - Supported Diffie-Hellman Groups:
MODP 768 (Group 1), MODP 1024 (Group 2) and MODP 1536 (Group 5) - Supported VPN Topologies: Site-to-Site VPN (L2-Bridging)
- Compatible VPN Clients: Cisco IOS's L2TPv3 VPN Client
- Compatible Client OS: Cisco IOS or other compatible O
...
- NAT-Traversal: RFC3947 IPsec over UDP Encapsulation
- Supported Ciphers:
DES-CBC, 3DES-CBC, AES-CBC, Blowfish-CBC and CAST-128-CBC - Transport UDP Ports:
UDP 500 and 4500
(Allow both ports on the firewall. Add UDP port forwarding for both 500 & 4500 on the NAT.) - Supported Hashes:
MD5 and SHA-1 - Supported Diffie-Hellman Groups:
MODP 768 (Group 1), MODP 1024 (Group 2) and MODP 1536 (Group 5) - Supported VPN Topologies: Site-to-Site VPN (L2-Bridging)
- Compatible VPN Clients: EtherIP VPN Client
- Compatible Client OS: EtherIP compatible OS
...
- Windows (32bit, 64bit)
Windows 98 / 98 SE / ME / NT 4.0 SP6a / 2000 SP4 / XP SP2, SP3 / Server 2003 SP2 / Vista SP1, SP2 / Server 2008 SP1, SP2 / Hyper-V Server 2008 / 7 SP1 / Server 2008 R2 SP1 / Hyper-V Server 2008 R2 / 8 / Server 2012 / Hyper-V Server 2012 / 8.1 / Server 2012 R2 / 10 / Server 2016 / Server 2019 / Server 2022 / 11
- Linux (32bit, 64bit)
Linux 2.4, 2.6, 3.x, 4.x
- Mac OS X (32bit, 64bit)
Mac OS X 10.4 Tiger or later/ 10.5
- FreeBSD (32bit, 64bit) (Stable Edition: Server and Bridge only, Developer Edition: Client is also supported)
Leopard / 10.6 Snow Leopard / 10.7 Lion / 10.8 Mountain Lion
- NetBSD
FreeBSD(32bit, 64bit) (Developer Edition only, Client is also supported)
- OpenBSD (32bit, 64bit) (Developer Edition only, Client is also supported)
FreeBSD 5, 6, 7, 8, 9
- Solaris (32bit, 64bit) (Server and Bridge only)
Solaris 8, 9, 10, 11
...
- Windows
Intel x86 (32bit), Intel x64 (64bit)
- Linux
Intel x86 (32bit), Intel x64 (64bit), PowerPC (32bit), ARM EABI (32bit), ARM legacy ABI (32bit), MIPS Little-Endian (32bit), Arm64 (64bitSH-4 (32bit)
- Mac OS X
Intel x86 (32bit), Intel x64 (64bit), PowerPC (32bit), PowerPC G5 (64bit)
- FreeBSD
Intel x86 (32bit), Intel x64 (64bit)
- Solaris
Intel x86 (32bit), Intel x64 (64bit), SPARC (32bit), SPARC (64bit)
...
Hardware Requirements for SoftEther VPN ClientServer
...
Other changes:
- /body/ul[14]/li/a/@class:
" external"⇒ "external" - /body/ul[14]/li[6]/a/@class:
" external"⇒ "external" - /body/ul[14]/li[6]/a[2]/@class:
" external"⇒ "external" - /body/ul[14]/li[7]/a/@class:
" external"⇒ "external" - /body/ul[14]/li[7]/a[2]/@class:
" external"⇒ "external" - /body/ul[14]/li[7]/a[3]/@class:
" external"⇒ "external" - /body/ul[14]/li[7]/a[4]/@class:
" external"⇒ "external" - /body/ul[14]/li[7]/a[5]/@class:
" external"⇒ "external" - /body/ul[15]/li/a/@class:
" external"⇒ "external"
Version from 03:22, 6 Mar 2013
...
- Supported Payload Protocols: Any Protocols in Ethernet
- Upper Underlying Protocol:
SSL (Secure Socket Layer) 3.0 /TLS (Transport Layer Security)1.0 - Lower Underlying Protocol: TCP/IP and UDP/IP Hybrid (on IPv4 and IPv6)
- Ciphers:
RC4-MD5, RC4-SHA, AES128-SHA, AES256-SHA, DES-CBC-SHA and DES-CBC3-SHA - Data Compression: zlib
- Session-key: 128bit
- Based Standards: Extended HTTPS over SSL Protocol (RFC2818, RFC 5246)
- WAN Optimization: 1-32 Parallel TCP Connection to Construct a Logical VPN Session
- Persistent Link: Infinite Auto-reconnect Function
- Proxy Support: HTTP Proxy Server and SOCKS Proxy Server
- TCP Ports: 443, 992 and 5555 is Listening by Default.
You can add/delete listening TCP ports. - Behind NAT Solution:
NAT-Traversal Function is enabled by default. No need to open any TCP/UDP ports on the NAT for accepting VPN connections which are initiated from Internet-side. - Anti-restricted Firewall Solution:
VPN over ICMP (Encapsulate all Ethernet packets over ICMP packets)
VPN over DNS (Encapsulate all Ethernet packets over DNS packets) - User-authentication:
- Anonymous
- Standard Password Authentication
- Password Authentication for RADIUS
- Password Authentication for NT Domain and Active Directory
- X.509 RSA PKI Certification Authentication (Key file on Disk)
- X.509 RSA PKI Certification Authentication (PKCS#11 Smart-cards or USB Tokens) - VPN Encapsulation Payload:
Ethernet (IEEE802.3) Frames (Up to 1,514bytes or 1,518bytes for IEEE802.1Q VLAN Tags) - Supported VPN Clients: SoftEther VPN Client
- Supported Client OS: Windows and Linux
- Supported VPN Topologies: Remote-access VPN, Site-to-Site VPN (L2-Bridging) and Site-to-Site VPN (L3-Routing)
...
- User-authentication Methods: PAP and MS-CHAPv2
- NAT-Traversal: RFC3947 IPsec over UDP Encapsulation
- Transport UDP Ports:
UDP 500 and 4500
(Allow both ports on the firewall. Add UDP port forwarding for both 500 & 4500 on the NAT.) - Supported
Ciphers:
DES-CBC, 3DES-CBC, AES-CBC, Blowfish-CBC and CAST-128-CBC Supported Hashes:
MD5 and SHA-1- Supported Diffie-Hellman Groups:
MODP 768 (Group 1), MODP 1024 (Group 2) and MODP 1536 (Group 5) - Compatible VPN Clients: Built-in VPN Clients on Windows, Mac, iOS and Android
- Compatible Client OS: Windows, Mac, iOS, Android and other L2TP-supported VPN Client OS
- Supported VPN Topologies: Remote-access VPN
...
- Clone Function for SSTP-VPN Server of Microsoft's Windows Server 2008 R2 / 2012.
- User-authentication Methods: PAP and MS-CHAPv2
- Supported Ciphers and Hashes on TLS:
RC4-MD5, RC4-SHA, AES128-SHA, AES256-SHA, DES-CBC-SHA and DES-CBC3-SHA - Compatible VPN Clients: Built-in VPN Clients on Windows Vista, 7, 8, RT
- Compatible Client OS: Windows Vista, 7, 8, RT, Server 2008, Server 2008 R2, Server 2012
- Supported VPN Topologies: Remote-access VPN
...
- Clone Function for Cisco's L2TPv3 Site-to-Site VPN Server
- NAT-Traversal: RFC3947 IPsec over UDP Encapsulation
- Transport UDP Ports:
UDP 500 and 4500
(Allow both ports on the firewall. Add UDP port forwarding for both 500 & 4500 on the NAT.) - Supported Ciphers:
DES-CBC, 3DES-CBC, AES-CBC, Blowfish-CBC and CAST-128-CBC - Supported Hashes:
MD5 and SHA-1 - Supported Diffie-Hellman Groups:
MODP 768 (Group 1), MODP 1024 (Group 2) and MODP 1536 (Group 5) - Supported VPN Topologies: Site-to-Site VPN (L2-Bridging)
- Compatible VPN Clients: Cisco IOS's L2TPv3 VPN Client
- Compatible Client OS: Cisco IOS or other compatible O
...
- NAT-Traversal: RFC3947 IPsec over UDP Encapsulation
- Supported Ciphers:
DES-CBC, 3DES-CBC, AES-CBC, Blowfish-CBC and CAST-128-CBC - Transport UDP Ports:
UDP 500 and 4500
(Allow both ports on the firewall. Add UDP port forwarding for both 500 & 4500 on the NAT.) - Supported Hashes:
MD5 and SHA-1 - Supported Diffie-Hellman Groups:
MODP 768 (Group 1), MODP 1024 (Group 2) and MODP 1536 (Group 5) - Supported VPN Topologies: Site-to-Site VPN (L2-Bridging)
- Compatible VPN Clients: EtherIP VPN Client
- Compatible Client OS: EtherIP compatible OS
...
- Windows (32bit, 64bit)
Windows 98 / 98 SE / ME / NT 4.0 SP6a / 2000 SP4 / XP SP2, SP3 / Server 2003 SP2 / Vista SP1, SP2 / Server 2008 SP1, SP2 / Hyper-V Server 2008 / 7 SP1 / Server 2008 R2 SP1 / Hyper-V Server 2008 R2 / 8 / Server 2012 / Hyper-V Server 2012
- Linux (32bit, 64bit)
Linux 2.4, 2.6, 3.x
- Mac OS X (32bit, 64bit)
Mac OS X 10.4 Tiger/ 10.5Leopard / 10.6 Snow Leopard / 10.7 Lion / 10.8 Mountain Lion
FreeBSD(32bit, 64bit)
FreeBSD 5, 6, 7, 8, 9
- Solaris (32bit, 64bit)
Solaris 8, 9, 10, 11
...
- Windows
Intel x86 (32bit), Intel x64 (64bit)
- Linux
Intel x86 (32bit), Intel x64 (64bit), PowerPC (32bit), ARM EABI (32bit), ARM legacy ABI (32bit), MIPS Little-Endian (32bit),SH-4 (32bit)
- Mac OS X
Intel x86 (32bit), Intel x64 (64bit), PowerPC (32bit), PowerPC G5 (64bit)
- FreeBSD
Intel x86 (32bit), Intel x64 (64bit)
- Solaris
Intel x86 (32bit), Intel x64 (64bit), SPARC (32bit), SPARC (64bit)
...
Hardware Requirements for SoftEther VPN Server
...
Version as of 02:20, 9 Mar 2022
...
- Supported Payload Protocols: Any Protocols in Ethernet
- Upper Underlying Protocol: TLS (Transport Layer Security) 1.0, 1.1, 1.2, 1.3
- Lower Underlying Protocol: TCP/IP and UDP/IP Hybrid (on IPv4 and IPv6)
- Ciphers:
TLS 1.3-based strong ciphers - Data Compression: zlib
- Session-key: 128bit
- Based Standards: Extended HTTPS over SSL Protocol (RFC2818, RFC 5246)
- WAN Optimization: 1-32 Parallel TCP Connection to Construct a Logical VPN Session
- Persistent Link: Infinite Auto-reconnect Function
- Proxy Support: HTTP Proxy Server and SOCKS Proxy Server
- TCP Ports: 443, 992 and 5555 is Listening by Default.
You can add/delete listening TCP ports. - Behind NAT Solution:
NAT-Traversal Function is enabled by default. No need to open any TCP/UDP ports on the NAT for accepting VPN connections which are initiated from Internet-side. - Anti-restricted Firewall Solution:
VPN over ICMP (Encapsulate all Ethernet packets over ICMP packets)
VPN over DNS (Encapsulate all Ethernet packets over DNS packets) - User-authentication:
- Anonymous
- Standard Password Authentication
- Password Authentication for RADIUS
- Password Authentication for NT Domain and Active Directory
- X.509 RSA PKI Certification Authentication (Key file on Disk)
- X.509 RSA PKI Certification Authentication (PKCS#11 Smart-cards or USB Tokens) - VPN Encapsulation Payload:
Ethernet (IEEE802.3) Frames (Up to 1,514bytes or 1,518bytes for IEEE802.1Q VLAN Tags) - Supported VPN Clients: SoftEther VPN Client
- Supported Client OS: Windows and Linux
- Supported VPN Topologies: Remote-access VPN, Site-to-Site VPN (L2-Bridging) and Site-to-Site VPN (L3-Routing)
...
- User-authentication Methods: PAP and MS-CHAPv2
- NAT-Traversal: RFC3947 IPsec over UDP Encapsulation
- Transport UDP Ports:
UDP 500 and 4500
(Allow both ports on the firewall. Add UDP port forwarding for both 500 & 4500 on the NAT.) - Supported Hashes:
- MD5 and SHA-1
- Supported Diffie-Hellman Groups:
MODP 768 (Group 1), MODP 1024 (Group 2) and MODP 1536 (Group 5) - Compatible VPN Clients: Built-in VPN Clients on Windows, Mac, iOS and Android
- Compatible Client OS: Windows, Mac, iOS, Android and other L2TP-supported VPN Client OS
- Supported VPN Topologies: Remote-access VPN
...
- Clone Function for SSTP-VPN Server of Microsoft's Windows Server 2008 R2 / 2012.
- User-authentication Methods: PAP and MS-CHAPv2
- Supported Ciphers and Hashes on TLS:
TLS-1.3 based strong ciphers - Compatible VPN Clients: Built-in VPN Clients on Windows Vista, 7, 8, 10, 11, RT
- Compatible Client OS: Windows Vista, 7, 8, 10, 11, RT, Server 2008, Server 2008 R2, Server 2012
- Supported VPN Topologies: Remote-access VPN
...
- Windows (32bit, 64bit)
Windows 98 / 98 SE / ME / NT 4.0 SP6a / 2000 SP4 / XP SP2, SP3 / Server 2003 SP2 / Vista SP1, SP2 / Server 2008 SP1, SP2 / Hyper-V Server 2008 / 7 SP1 / Server 2008 R2 SP1 / Hyper-V Server 2008 R2 / 8 / Server 2012 / Hyper-V Server 2012 / 8.1 / Server 2012 R2 / 10 / Server 2016 / Server 2019 / Server 2022 / 11
- Linux (32bit, 64bit)
Linux 2.4, 2.6, 3.x, 4.x
- Mac OS X (32bit, 64bit)
Mac OS X 10.4 Tiger or later
- FreeBSD (32bit, 64bit) (Stable Edition: Server and Bridge only, Developer Edition: Client is also supported)
- NetBSD (32bit, 64bit) (Developer Edition only, Client is also supported)
- OpenBSD (32bit, 64bit) (Developer Edition only, Client is also supported)
- Solaris (32bit, 64bit) (Server and Bridge only)
Solaris 8, 9, 10, 11
...
- Windows
Intel x86 (32bit), Intel x64 (64bit)
- Linux
Intel x86 (32bit), Intel x64 (64bit), PowerPC (32bit), ARM EABI (32bit), ARM legacy ABI (32bit), MIPS Little-Endian (32bit), Arm64 (64bit)
- Mac OS X
Intel x86 (32bit), Intel x64 (64bit), PowerPC (32bit), PowerPC G5 (64bit)
- FreeBSD
Intel x86 (32bit), Intel x64 (64bit)
- Solaris
Intel x86 (32bit), Intel x64 (64bit), SPARC (32bit), SPARC (64bit)
...
Hardware Requirements for SoftEther VPN Client
...