Table of contents
You are currently comparing two old versions - only when you are comparing against the latest version can you revert. Return to version archive.
Combined revision comparison
...
- Supported Payload Protocols: Any Protocols in Ethernet
- Upper Underlying Protocol: SSL (Secure Socket Layer) 3.0 / TLS (Transport Layer Security) 1.0
- Lower Underlying Protocol: TCP/IP and UDP/IP Hybrid (on IPv4 and IPv6)
- Ciphers:
RC4-MD5, RC4-SHA, AES128-SHA, AES256-SHA, DES-CBC-SHA and DES-CBC3-SHA - Data Compression: zlib
- Session-key: 128bit
- Based Standards: Extended HTTPS over SSL Protocol (RFC2818, RFC 5246)
- WAN Optimization: 1-32 Parallel TCP Connection to Construct a Logical VPN Session
- Persistent Link: Infinite Auto-reconnect Function
- Proxy Support: HTTP Proxy Server, SOCKS Proxy Server
- TCP Ports: 443, 992 and 5555 is Listening by Default. You can add/delete listening TCP ports.
- Behind NAT Solution:
NAT-Traversal Function is enabled by default. No need to open any TCP/UDP ports on the NAT for accepting VPN connections which are initiated from Internet-side. - Anti-restricted Firewall Solution:
VPN over ICMP (Encapsulate all Ethernet packets over ICMP packets)
VPN over DNS (Encapsulate all Ethernet packets over DNS packets) - User-authentication:
- Anonymous
- Standard Password Authentication
- Password Authentication for RADIUS
- Password Authentication for NT Domain and Active Directory
- X.509 RSA PKI Certification Authentication (Key file on Disk)
- X.509 RSA PKI Certification Authentication (PKCS#11 Smart-cards or USB Tokens) - VPN Encapsulation Payload
Ethernet (IEEE802.3) Frames (Up to 1,514bytes or 1,518bytes for IEEE802.1Q VLAN Tags) - Supported VPN Clients: SoftEther VPN Client
- Supported Client OS: Windows and Linux
- Supported VPN Topologies: Remote-access VPN, Site-to-Site VPN (L2-Bridging) and Site-to-Site VPN (L3-Routing)
...
- User-authentication Methods: PAP and MS-CHAPv2
- NAT-Traversal: RFC3947 IPsec over UDP Encapsulation
- Transport UDP Ports:
UDP 500 and 4500
(Allow both ports on the firewall. Add UDP port forwarding for both 500 & 4500 on the NAT.) - Supported Ciphers:
DES-CBC, 3DES-CBC, AES-CBC, Blowfish-CBC and CAST-128-CBC - Supported Hashes:
MD5 and SHA-1 - Supported Diffie-Hellman Groups:
MODP 768 (Group 1), MODP 1024 (Group 2) and MODP 1536 (Group 5) - Compatible VPN Clients: Built-in VPN Clients on Windows, Mac, iOS and Android
- Compatible Client OS: Windows, Mac, iOS, Android and other L2TP-supported VPN Client OS
- Supported VPN Topologies: Remote-access VPN
...
- OpenVPN Clone Function for Compatibility with OpenVPN Technologies, Inc.'s implementations.
- Default Ports:
TCP 443, 992 and 5555
UDP: 1194 - Supported Ciphers:
AES-128-CBC, AES-192-CBC, AES-256-CBC, BF-CBC, CAST-CBC, CAST5-CBC, DES-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, RC2-40-CBC, RC2-64-CBC and RC2-CBC - Supported Hashes:
SHA, SHA1, MD5, MD4 and RMD160 - Operational Mode: L2 (Bridging) and L3 (Routing)
- Compatible VPN Clients: OpenVPN for PC (Windows, Mac, Linux) and OpenVPN Connect by OpenVPN Technologies, Inc.
- Compatible Client OS: Windows, Linux, Mac, iOS and Android
- Supported VPN Topologies: Remote-access VPN, Site-to-Site VPN (L2-Bridging) and Site-to-Site VPN (L3-Routing)
...
- Clone Function for Cisco's L2TPv3 Site-to-Site VPN Server
- NAT-Traversal: RFC3947 IPsec over UDP Encapsulation
- Transport UDP Ports:
UDP 500 and 4500
(Allow both ports on the firewall. Add UDP port forwarding for both 500 & 4500 on the NAT.) - Supported Ciphers:
DES-CBC, 3DES-CBC, AES-CBC, Blowfish-CBC and CAST-128-CBC - Supported Hashes:
MD5 and SHA-1 - Supported Diffie-Hellman Groups:
MODP 768 (Group 1), MODP 1024 (Group 2) and MODP 1536 (Group 5) - Supported VPN Topologies: Site-to-Site VPN (L2-Bridging)
- Compatible VPN Clients: Cisco IOS's L2TPv3 VPN Client
- Compatible Client OS: Cisco IOS or other compatible O
...
- NAT-Traversal: RFC3947 IPsec over UDP Encapsulation
- Supported Ciphers:
DES-CBC, 3DES-CBC, AES-CBC, Blowfish-CBC and CAST-128-CBC - Transport UDP Ports:
UDP 500 and 4500
(Allow both ports on the firewall. Add UDP port forwarding for both 500 & 4500 on the NAT.) - Supported Hashes:
MD5 and SHA-1 - Supported Diffie-Hellman Groups:
MODP 768 (Group 1), MODP 1024 (Group 2) and MODP 1536 (Group 5) - Supported VPN Topologies: Site-to-Site VPN (L2-Bridging)
- Compatible VPN Clients: EtherIP VPN Client
- Compatible Client OS: EtherIP compatible OS
...
Version from 02:04, 23 Feb 2013
...
Version as of 06:08, 26 Feb 2013
...
- Supported Payload Protocols: Any Protocols in Ethernet
- Upper Underlying Protocol: SSL (Secure Socket Layer) 3.0 / TLS (Transport Layer Security) 1.0
- Lower Underlying Protocol: TCP/IP and UDP/IP Hybrid (on IPv4 and IPv6)
- Ciphers:
RC4-MD5, RC4-SHA, AES128-SHA, AES256-SHA, DES-CBC-SHA and DES-CBC3-SHA - Data Compression: zlib
- Session-key: 128bit
- Based Standards: Extended HTTPS over SSL Protocol (RFC2818, RFC 5246)
- WAN Optimization: 1-32 Parallel TCP Connection to Construct a Logical VPN Session
- Persistent Link: Infinite Auto-reconnect Function
- Proxy Support: HTTP Proxy Server, SOCKS Proxy Server
- TCP Ports: 443, 992 and 5555 is Listening by Default. You can add/delete listening TCP ports.
- Behind NAT Solution:
NAT-Traversal Function is enabled by default. No need to open any TCP/UDP ports on the NAT for accepting VPN connections which are initiated from Internet-side. - Anti-restricted Firewall Solution:
VPN over ICMP (Encapsulate all Ethernet packets over ICMP packets)
VPN over DNS (Encapsulate all Ethernet packets over DNS packets) - User-authentication:
- Anonymous
- Standard Password Authentication
- Password Authentication for RADIUS
- Password Authentication for NT Domain and Active Directory
- X.509 RSA PKI Certification Authentication (Key file on Disk)
- X.509 RSA PKI Certification Authentication (PKCS#11 Smart-cards or USB Tokens) - VPN Encapsulation Payload
Ethernet (IEEE802.3) Frames (Up to 1,514bytes or 1,518bytes for IEEE802.1Q VLAN Tags) - Supported VPN Clients: SoftEther VPN Client
- Supported Client OS: Windows and Linux
- Supported VPN Topologies: Remote-access VPN, Site-to-Site VPN (L2-Bridging) and Site-to-Site VPN (L3-Routing)
...
- User-authentication Methods: PAP and MS-CHAPv2
- NAT-Traversal: RFC3947 IPsec over UDP Encapsulation
- Transport UDP Ports:
UDP 500 and 4500
(Allow both ports on the firewall. Add UDP port forwarding for both 500 & 4500 on the NAT.) - Supported Ciphers:
DES-CBC, 3DES-CBC, AES-CBC, Blowfish-CBC and CAST-128-CBC - Supported Hashes:
MD5 and SHA-1 - Supported Diffie-Hellman Groups:
MODP 768 (Group 1), MODP 1024 (Group 2) and MODP 1536 (Group 5) - Compatible VPN Clients: Built-in VPN Clients on Windows, Mac, iOS and Android
- Compatible Client OS: Windows, Mac, iOS, Android and other L2TP-supported VPN Client OS
- Supported VPN Topologies: Remote-access VPN
...
- OpenVPN Clone Function for Compatibility with OpenVPN Technologies, Inc.'s implementations.
- Default Ports:
TCP 443, 992 and 5555
UDP: 1194 - Supported Ciphers:
AES-128-CBC, AES-192-CBC, AES-256-CBC, BF-CBC, CAST-CBC, CAST5-CBC, DES-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, RC2-40-CBC, RC2-64-CBC and RC2-CBC - Supported Hashes:
SHA, SHA1, MD5, MD4 and RMD160 - Operational Mode: L2 (Bridging) and L3 (Routing)
- Compatible VPN Clients: OpenVPN for PC (Windows, Mac, Linux) and OpenVPN Connect by OpenVPN Technologies, Inc.
- Compatible Client OS: Windows, Linux, Mac, iOS and Android
- Supported VPN Topologies: Remote-access VPN, Site-to-Site VPN (L2-Bridging) and Site-to-Site VPN (L3-Routing)
...
- Clone Function for Cisco's L2TPv3 Site-to-Site VPN Server
- NAT-Traversal: RFC3947 IPsec over UDP Encapsulation
- Transport UDP Ports:
UDP 500 and 4500
(Allow both ports on the firewall. Add UDP port forwarding for both 500 & 4500 on the NAT.) - Supported Ciphers:
DES-CBC, 3DES-CBC, AES-CBC, Blowfish-CBC and CAST-128-CBC - Supported Hashes:
MD5 and SHA-1 - Supported Diffie-Hellman Groups:
MODP 768 (Group 1), MODP 1024 (Group 2) and MODP 1536 (Group 5) - Supported VPN Topologies: Site-to-Site VPN (L2-Bridging)
- Compatible VPN Clients: Cisco IOS's L2TPv3 VPN Client
- Compatible Client OS: Cisco IOS or other compatible O
...
- NAT-Traversal: RFC3947 IPsec over UDP Encapsulation
- Supported Ciphers:
DES-CBC, 3DES-CBC, AES-CBC, Blowfish-CBC and CAST-128-CBC - Transport UDP Ports:
UDP 500 and 4500
(Allow both ports on the firewall. Add UDP port forwarding for both 500 & 4500 on the NAT.) - Supported Hashes:
MD5 and SHA-1 - Supported Diffie-Hellman Groups:
MODP 768 (Group 1), MODP 1024 (Group 2) and MODP 1536 (Group 5) - Supported VPN Topologies: Site-to-Site VPN (L2-Bridging)
- Compatible VPN Clients: EtherIP VPN Client
- Compatible Client OS: EtherIP compatible OS
...